Name: MKM Clap LS01-C Carbon fibre pocket knife, Bob Terzuola design
Brand: MKM Knives
SKU: MMK-LS01-C
Price: 284.9 EUR
Availability: InStock

Spyderco Sharpmaker, 204MF

notforsale

not_replaced_in

productlabel

Skerper paddle strop Viking, rough, stropping paddle

Skerper Paddle Strop STP001, stropping paddle

Skerper Basic sharpening set 180/600/1000/3000 with ceramic sharpening steel, SH004

Work Sharp Angle Set knife sharpener, WSBCHAGS

Skerper Maintenance Oil Pen MA002, 10 ml

Knivesandtools 550 paracord type III, fish and fire paracord, 100 ft (30.48 m)

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

WE Knife A-01A paracord lanyard with titanium bead, green-black

Knivesandtools Knife Pouch Black, by Maxpedition

Ballistol maintenance oil, 50 ml

Knivesandtools #EveryDayCloth, micro-fibre cloth

Knivesandtools Knife Patch, Padraig Croke design

Knivesandtools Skull Patch, Padraig Croke design

Hultafors Flint FS fire steel, 380280

Knivesandtools #OneKnifeStand, knife stand

Knivesandtools Logo Pin

Knivesandtools Sticker Set #02, Padraig Croke design

Knivesandtools Sticker Set #01 

Handle/blade: carbon fibre/M390
Blade length: 7.8 cm
Weight: 105 grams

The **MKM Clap** is an EDC gentleman's knife, designed by Bob Terzuola. The knife is compact in terms of size, but has still been enhanced with a 7.8 cm blade. Combined with the use of stunning materials the MKM Clap is one of the most beautiful gentleman's knives in our range.

 Remarkable about the MKM Clap is that you open it with the flipper. Because of the ball bearings around the pivot it will open quickly. Looking for a knife that won't open so fast? No worries, simply remove the flipper. After all, this knife comes with a torx key with a cover screw. As such the MKM Clap suddenly becomes a knife you open with two hands making it legal in many places in Europe.

 The shape of the blade is breath-taking. A droppoint shape with harpoon fin on the spine and a compound grind with fuller. Quite the mouth full, but in reality it is a combination of cool shapes and features you rarely see together. MKM chose Böhler M390 steel for this knife. This is a type of steel that retains its sharpness well and is incredibly wear-resistant. It is also very stainless. One of the most popular choices at the moment. When opened the blade is locked by a linerlock. Stunning details are the blue collar around the pivot, the blue backspacer and the blue pocket clip. Stunning.

 This version has been enhanced with a carbon fibre handle.

 ## Where does MKM Knives come from?

 MKM is a cooperation between Viper, LionSteel, Fox and Mercury. Four masters working in the Italian knife industry. It is no coincidence that they all come from the city: Maniago, northern Italy. The knife capital of the south of Europe. MKM stands for Maniago Knife Makers. This MKM Clap is made by LionSteel.



MKM Clap LS01-C Carbon fibre pocket knife, Bob Terzuola design

handle_material

MKM Clap LS01-G BK Black G10 pocket knife, Bob Terzuola design

colour

handedness

blade_finish

opening_system

knife_edge_type

material_sheath

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

MKM Clap LS01-GC Green Canvas Micarta pocket knife, Bob Terzuola design

value_weight

MKM Clap LS01-NC Natural Canvas Micarta pocket knife, Bob Terzuola design

MKM Clap LS01-O Olive pocket knife, Bob Terzuola design

MKM Clap LS01-S Santos pocket knife, Bob Terzuola design

brand

zm_series

expectedRestockDate

legal_agecheck_key

msrp_price

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

bearring_type

The is the type of bearring used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearring types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearring type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

MKM Clap LS01-C Carbon fibre pocket knife, Bob Terzuola design

MKM Clap LS01-C Carbon fibre pocket knife, Bob Terzuola design

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

MKM Clap LS01-C Carbon fibre pocket knife, Bob Terzuola design

MKM Clap LS01-C Carbon fibre pocket knife, Bob Terzuola design

MKM Clap LS01-C Carbon fibre pocket knife, Bob Terzuola design

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

MKM Clap LS01-C Carbon fibre pocket knife, Bob Terzuola design

Relevant topics