Name: LionSteel KUR ST pocket knife, santos
Brand: Lionsteel
SKU: LI-KUR-ST
Price: 153.97 EUR
Availability: OutOfStock

LionSteel 900FDV1 CR belt sheath large, cordura

notforsale

not_replaced_in

Ballistol maintenance oil, 50 ml

productlabel

LionSteel KUR BBK blackwashed, black G10

legal_agecheck_key

Knivesandtools Knife Pouch Black, by Maxpedition

Work Sharp Professional Precision Adjust WSBCHPAJ-PRO-I sharpening system

Spyderco Sharpmaker, 204MF

Skerper paddle strop Viking, rough, stropping paddle

Skerper Paddle Strop STP001, stropping paddle

Skerper Basic sharpening set 180/600/1000/3000 with ceramic sharpening steel, SH004

LionSteel Eggie Bronze Titanium EG-BR keychain bit set and multi-tool

LionSteel Eggie Grey Titanium EG-GY keychain bit set and multi-tool

LionSteel KUR BK, black G10

LionSteel KUR OR, orange G10

Skerper Maintenance Oil Pen MA002, 10 ml

LionSteel 900FDV1 PL belt sheath large, black leather

LionSteel 900FD01 PL sheath large, black leather

Knivesandtools 550 Paracord Type III Military Spec RG1168H, coyote, 100 ft (30.48 m)

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

Knivesandtools 550 paracord type III, colour: wetland, 100 ft (30.48 m)

Handle/blade: santos/Sleipner
Blade length: 8.6 cm
Weight: 150 grams


The **LionSteel KUR** is a stunning Italian pocket knife, designed by Michele 'moletta' Pensato. The beautiful lines in this design stand out. This typical example of Italian design doesn't only look amazing, it also feels great in hand. The handle is made from stunning Santos wood. Really beautiful. For extra grip the handle is enhanced with a nice grip pattern. The blade is made from Sleipner steel from Austria. This is type of tool steel that is known for the great balance between sharpness retention and strength. Do, however, be careful around acids, moisture and salt: tool steel is not completely stainless. So clean and dry it after use. The blade is enhanced with a cool stonewashed finish. As such traces of use don't stand out. So a perfect choice for daily use.




The blade runs on ball bearings and therefore moves smoothly. As such it is not that surprising it opens quickly with the help of the flipper. When opened the blade is kept in place by a solid liner lock. The remarkable aspect of this version of the KUR with wooden handle is that you can also remove the flipper. The knife comes with a torx key to make sure you can easily take it off. To fill the hole it also comes with a small screw. By removing the flipper it suddenly becomes a fancy knife that can be opened with two hands.




The LionSteel KUR is a great knife for daily use. An epitome of Italian design, combined with technical perfection.




LionSteel KUR ST pocket knife, santos

handle_material

LionSteel KUR UL pocket knife, olive wood

colour

handedness

blade_finish

opening_system

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

brand

zm_series

videos

expectedRestockDate

msrp_price

strike_price

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

bearring_type

The is the type of bearring used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearring types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearring type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

LionSteel KUR ST pocket knife, santos

LionSteel KUR ST pocket knife, santos

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

LionSteel KUR ST pocket knife, santos

LionSteel KUR ST pocket knife, santos

LionSteel KUR ST pocket knife, santos

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

LionSteel KUR ST pocket knife, santos

Relevant topics