Name: Kizer Clutch Ki4556A1 Micarta pocket knife, Carlos Elstner design
Brand: Kizer
SKU: KZKI4556A1
Price: 165.2 EUR
Availability: BackOrder

Work Sharp Professional Precision Adjust WSBCHPAJ-PRO-I sharpening system

notforsale

not_replaced_in

Knives and Tools Knife Cleaning Mat, rubber

Skerper Paddle Strop STP001, stropping paddle

Skerper paddle strop Viking, rough, stropping paddle

Skerper Basic sharpening set 180/600/1000/3000 with ceramic sharpening steel, SH004

Spyderco Sharpmaker, 204MF

productlabel

Skerper Maintenance Oil Pen MA002, 10 ml

Knivesandtools 550 Paracord Type III Military Spec RG1168H, coyote, 100 ft (30.48 m)

Knivesandtools 550 Paracord Type III Military Spec RG1167H, foliage, 100 ft (30.48 m)

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

Nano-Oil 10w maintenance oil 8cc/8ml

Knivesandtools Knife Patch, Padraig Croke design

Knivesandtools Skull Patch, Padraig Croke design

Knivesandtools #MatchPatch, #01 OG-Green, patch

Knivesandtools Knife Pouch Black, by Maxpedition

Knivesandtools EDC pouch

Ballistol maintenance oil, 50 ml

Handle/blade: titanium and micarta/CPM S35VN
Blade length: 8.6 cm 
Weight: 85 grams

The **Kizer Clutch Ki4556A1** is a slim and light-weight EDC pocket knife, designed by Carlos Elstner. It may be slim and light-weight: 8.6 cm is not small at all. The handle is stunning. The nicely rounded titanium, combined with micarta inlay looks amazing. The inlay nicely fits inside. On the lock side it is great to see how Kizer made sure the lockbar of the framelock falls slightly behind the inlay. As such the inlay also functions as an overtravel stop. All to make sure the lock will stay in great shape for years to come.



The blade is made from CPM S35VN. An American type of powder steel that retains its sharpness well, but is also easy to sharpen. The satin finish looks amazing. You quickly open the blade with the flipper to make sure you can also quickly get to work.




Kizer Clutch Ki4556A1 Micarta pocket knife, Carlos Elstner design

colour

Kizer Clutch Ki4556A3 Micarta Tan pocket knife, Carlos Elstner design

handedness

blade_finish

opening_system

handle_material

knife_edge_type

material_sheath

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

brand

expectedRestockDate

legal_agecheck_key

msrp_price

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

Material

bearring_type

The is the type of bearing used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearing types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearing type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Kizer Clutch Ki4556A1 Micarta pocket knife, Carlos Elstner design

Kizer Clutch Ki4556A1 Micarta pocket knife, Carlos Elstner design

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Kizer Clutch Ki4556A1 Micarta pocket knife, Carlos Elstner design

Kizer Clutch Ki4556A1 Micarta pocket knife, Carlos Elstner design

Kizer Clutch Ki4556A1 Micarta pocket knife, Carlos Elstner design

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Kizer Clutch Ki4556A1 Micarta pocket knife, Carlos Elstner design

Relevant topics