Work Sharp Professional Precision Adjust WSBCHPAJ-PRO-I sharpening system

notforsale

not_replaced_in

Fox TUR FX-523OR, Orange pocket knife, Jesper Voxnaes design

legal_agecheck_key

Skerper paddle strop Viking, rough, stropping paddle

Spyderco Sharpmaker, 204MF

productlabel

Skerper Paddle Strop STP001, stropping paddle

Skerper Basic sharpening set 180/600/1000/3000 with ceramic sharpening steel, SH004

Knives and Tools Knife Cleaning Mat, rubber

Skerper Maintenance Oil Pen MA002, 10 ml

Spyderco Bead BEAD5LY Flat Bead Pewter with lanyard

Knivesandtools 550 paracord type III, fish and fire paracord, 100 ft (30.48 m)

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

Nano-Oil 10w maintenance oil 8cc/8ml

Knivesandtools Knife Patch, Padraig Croke design

Knivesandtools Skull Patch, Padraig Croke design

Knivesandtools Knife Pouch Black, by Maxpedition

Knivesandtools EDC pouch

Ballistol maintenance oil, 50 ml

Knivesandtools #OneKnifeStand, knife stand

Handle/blade: G10/Böhler N690Co
Blade length: 7.3 cm
Weight: 100 grams

The **Fox TUR** is a stunning pocket knife that combines Danish design with Italian production. A great Fox-Vox cooperation, in the shape of knife brand Fox and designer Jesper Voxnaes from Vox Knives. Amazing materials and great techniques find each other in this stylish gentleman's knife.



We start with the blade. Made from Böhler N690 and therefore really good. Retains its sharpness well and is corrosion resistant. In terms of shape it is a classic droppoint. A very common blade shape you can use for almost all daily tasks. Pointed enough for packages, enough belly to cut things on a flat surface and a flat part to peel an apple. You quickly open the blade with one hand with the thumb stud. You can also remove the thumb stud with the included torx key.



The handle is made from G10. The curve in the handle is truly perfect. Both aesthetically and ergonomically sound. The backspacer is also made from G10. A great detail about the clip is how it is attached. It is namely screwed on the inside of the handle. As such the whole looks very *clean*. Nice when a sleek pocket clip sticks out from your pocket.



Inside the handle the TUR also excels. On one side the G10 scale is enhanced with a steel liner. As such you hardly notice the liner, only at the part where it takes care of the lock.



To complete the whole the Fox TUR comes with a nylon storage case.




Fox TUR FX-523B, Black pocket knife, Jesper Voxnaes design

colour

Fox TUR FX-523OD, OD Green pocket knife, Jesper Voxnaes design

handedness

blade_finish

opening_system

handle_material

knife_edge_type

material_sheath

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

brand

zm_series

expectedRestockDate

msrp_price

valueForMoneyStars

meetsExpectationsStars

authorCity

Vraiment bon, action fluide et rapide, sortie rasoir de la boîte, très beau selon mes goûts. J’adore les fixes de chez Fox, c’est mon premier pliant de cette marque et je ne suis pas déçu. Ergonomie du manche au top 

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

bearring_type

The is the type of bearing used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearing types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearing type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Fox TUR FX-523B, Black pocket knife, Jesper Voxnaes design

Fox TUR FX-523B, Black pocket knife, Jesper Voxnaes design

Full description

Specifications

Reviews

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Fox TUR FX-523B, Black pocket knife, Jesper Voxnaes design

Fox TUR FX-523B, Black pocket knife, Jesper Voxnaes design

Fox TUR FX-523B, Black pocket knife, Jesper Voxnaes design

Full description

Specifications

Reviews

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Fox TUR FX-523B, Black pocket knife, Jesper Voxnaes design

Relevant topics