Name: Amare Knives Coloso, black G10, pocket knife
Brand: Amare Knives
SKU: AS-COL-BK
Price: 59.95 EUR
Availability: InStock
Rating: 10 (3 reviews)

Ballistol maintenance oil, 50 ml

notforsale

not_replaced_in

productlabel

Knivesandtools 550 paracord type III, fish and fire paracord, 100 ft (30.48 m)

Knivesandtools Knife Patch, Padraig Croke design

Skerper paddle strop Viking, rough, stropping paddle

Skerper Paddle Strop STP001, stropping paddle

Skerper Basic sharpening set 180/600/1000/3000 with ceramic sharpening steel, SH004

Work Sharp Angle Set knife sharpener, WSBCHAGS

Skerper Maintenance Oil Pen MA002, 10 ml

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

WE Knife A-01A paracord lanyard with titanium bead, green-black

Knivesandtools #EveryDayCloth, micro-fibre cloth

Knivesandtools Skull Patch, Padraig Croke design

Hultafors Flint FS fire steel, 380280

Knivesandtools #OneKnifeStand, knife stand

Knivesandtools Logo Pin

Knivesandtools Sticker Set #02, Padraig Croke design

Knivesandtools Sticker Set #01 

Kershaw Recap 8830X keychain tool

Handle/blade: G10/D2
Blade length: 10.1 cm
Weight: 240 grams

The **Amare Knives Coloso** is a tough and robust knife. Designed by German knife maker Ulrich Hennicke and produced by Real Steel Knives. The name already says it all, this is not a small pocket knife. With a blade length of 10.1 cm and a weight of 240 grams the Coloso is a real users knife. Perfect for everyone who is looking to push their pocket knife to the limit every single day!

 Too much? Not at all. The D2 steel blade can handle quite a lot. D2 is a very tough and sturdy type of steel that is definitely made to be used. Do, however, make sure you properly clean the blade after use. This type of steel is not completely stainless. You can easily open the blade with the flipper mechanism. Because of the use of ball bearings the blade will easily move in the handle making opening and closing the Coloso a piece of cake.

 The handle is made from G10 and solid steel liners. The G10 handle is enhanced with a light texture and gives you a lot of grip. The handle has been enhanced with decorative lines which give this knife extra charm. Because of the organic shape of the handle the ergonomics are sublime. Once in hand the handle rests comfortably in your palm and your thumb will automatically fall into the cut-out on the spine of the handle.



Amare Knives Coloso, black G10, pocket knife

colour

Amare Knives Coloso, tan G10, black blade, pocket knife

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

brand

expectedRestockDate

legal_agecheck_key

msrp_price

valueForMoneyStars

meetsExpectationsStars

authorCity

Mes doet zijn naam eer aan, is een joekel van een mes. Kwaliteit is zeer goed, voelt zeer solide aan. Mes is dus wel groter en zwaarder dan de meeste edc messen. Openen gaat zeer snel

Solide, l'âme faite pour "Brutus". A privilégier pour "gros travaux".

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

bearring_type

The is the type of bearring used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearring types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearring type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Amare Knives Coloso, black G10, pocket knife

Amare Knives Coloso, black G10, pocket knife

Full description

Specifications

Reviews

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Amare Knives Coloso, black G10, pocket knife

Amare Knives Coloso, black G10, pocket knife

Amare Knives Coloso, black G10, pocket knife

Full description

Specifications

Reviews

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Amare Knives Coloso, black G10, pocket knife

Relevant topics