Name: Viper Koi VT4010FC Carbon fibre N690 fixed knife, Jesper Voxnaes design
Brand: Viper
SKU: VPVT4010FC
Price: 164.49 EUR
Availability: InStock
Rating: 10 (1 reviews)

Spyderco Sharpmaker, 204MF

notforsale

not_replaced_in

productlabel

Blade-Tech Thigh Rig, leg attachment for sheaths and holsters

Skerper paddle strop Viking, rough, stropping paddle

Skerper Paddle Strop STP001, stropping paddle

Skerper Basic sharpening set 180/600/1000/3000 with ceramic sharpening steel, SH004

Work Sharp Angle Set knife sharpener, WSBCHAGS

Knives and Tools Knife Cleaning Mat, rubber

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

Blade-Tech Tek-Lok (large) universal belt loop mounting system

UltiClip XL clip for sheaths

Knivesandtools Knife Patch, Padraig Croke design

Knivesandtools Skull Patch, Padraig Croke design

UltiClip UltiLink Complete Kit, mounting set for sheaths

Ballistol maintenance oil, 50 ml

Knivesandtools #OneKnifeStand, knife stand

Knivesandtools #EveryDayCloth, micro-fibre cloth

Ballistol maintenance oil spray, 200 ml

Knivesandtools Logo Pin

Knivesandtools 550 paracord type III, colour: olive drab, 100 ft (30.48 m)

Handle/blade: carbon fibre/M390
Blade length: 8.8 cm
Weight: 115 grams

The **Viper Koi** is a versatile outdoor knife, designed by Jesper Voxnaes. For this design he combined sleek lines with the typical Italian curved contours. You use it during camping trips or hikes, but also in the outdoor kitchen or even while hunting.

The blade is short and high. A little different, but it works for the Koi. The blade is made from Böhler N690. This is a stainless type of steel that retains its sharpness well. At the same time it is also easy to sharpen.


The handle of the Viper Koi is enhanced with carbon fibre. Because of the hollow pins you can add a nice lanyard or wrist strap. You carry the Viper Koi in the included kydex sheath. It is enhanced with a nice belt clip which you can attach in many different ways to make sure you can carry it either way you like.

Viper Koi VT4010FC Carbon fibre N690 fixed knife, Jesper Voxnaes design

handle_material

Viper Koi VT4009GB Black G10 N690 fixed knife, Jesper Voxnaes design

colour

blade_finish

knife_edge_type

material_sheath

sharpening_type

knife_bladeshape

sharpening_angle

pocketknife_steel

knife_sheath

value_length

value_weight

value_blade_height

value_blade_length

value_blade_thickness

brand

zm_series

expectedRestockDate

legal_agecheck_key

msrp_price

strike_price

valueForMoneyStars

meetsExpectationsStars

authorCity

Design und Fertigungsqualität top, Maniago eben. Leider gab es Abweichung in der Beschreibung; Klingenstahl N690 statt M390. Das Messer zurückgeschickt.

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_handle_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

fixed_blade_type

knife_best_use

We like to highlight what use the manufacturer had in mind, or what we believe the knife is suited for

Best use

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Viper Koi VT4010FC Carbon fibre N690 fixed knife, Jesper Voxnaes design

Viper Koi VT4010FC Carbon fibre N690 fixed knife, Jesper Voxnaes design

Full description

Specifications

Reviews

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Recommended combi-deals

Viper Koi VT4010FC Carbon fibre N690 fixed knife, Jesper Voxnaes design

Viper Koi VT4010FC Carbon fibre N690 fixed knife, Jesper Voxnaes design

Viper Koi VT4010FC Carbon fibre N690 fixed knife, Jesper Voxnaes design

Full description

Specifications

Reviews

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Recommended combi-deals

Viper Koi VT4010FC Carbon fibre N690 fixed knife, Jesper Voxnaes design

Relevant topics