Name: TSPROF Double Fillet Clamp PT1900060 clamps
Brand: TSProf
SKU: TSPT1900060
Price: 104.49 EUR
Availability: InStock
Rating: 10 (1 reviews)

Skerper Professional sharpening set 220/1000/2000/5000, dressing stone + holder

notforsale

not_replaced_in

msrp_price

Skerper Sink Bridge sharpening stone holder, SA002

TSPROF Blitz TS-SH1900610 diamond-coated sharpening stone coarse, F220

TSPROF Boride CS-HD TSSH2101370 5-piece sharpening stone set

TSPROF Single Clamp, P000004

TSPROF set of five aluminium mounting sheets

TSPROF Boride CS-HD Narrow 6-piece sharpening stone set

Skerper paddle strop Viking, rough, stropping paddle

TSPROF Abrasive Holder with Axicube-I PT2100300 sharpening stone holder with digital angle meter

Skerper Paddle Strop STP001, stropping paddle

TSPROF Whole Milled Fillet Clamps TS-PT2000172

TSPROF Axicube-I V2 MS2201080 digital angle meter

TSPROF Blitz Pro Scissor Clamp TS-BS22012P

TSPROF Kadet Whole Milled Fillet Clamps PT2100310 clamps

Skerper Basic ceramic sharpening steel, 24.5 cm, SH003

TSPROF Blitz Scissors Clamp, scissors adapter

Skerper Basic diamond sharpening steel 30 cm, SH005

Skerper Pocket Strop STP002, stropping paddle

Skerper Basic sharpening pen with a diamond steel, SO001

Ballistol maintenance oil, 50 ml

Knivesandtools #EveryDayCloth, micro-fibre cloth

The **TSPROF Double Fillet Clamps** are two thin clamps to sharpen long, but very narrow blades. When sharpening knives with a low blade at a very low angle, you often see that the sharpening systems hits the clamp instead of the edge of the knife. Not with these clamps!

With this clamp very thin blades, such as those on a filleting knife, can also be sharpened on the TSPROF K03 and Kadet sharpening system. When sharpening knives with a low blade at a very low angle, you often see that the sharpening systems hits the clamp instead of the edge of the knife. Not with these clamps! 

You secure the clamps by turning the 2 mm Allen bolts. To prevent scratches we recommend taping the place where you secure the knife with the clamp with some painter's tape. The clamps come with four spare screws and two 2 mm Allen keys. 

These clamps are mostly suited for the TSPROF K03 sharpening system because they are long. They, however, also fit on the TSPROF Kadet sharpening system.

  * Recommended blade length: 3 to 30 cm
  * Minimum sharpening angle is 6.5 degrees
  * Maximum blade thickness: 2.5 mm
  * Width of one clamp: 16 mm

TSPROF Double Fillet Clamp PT1900060 clamps

brand

colour

series

material

value_length

value_weight

expectedRestockDate

strike_price

valueForMoneyStars

meetsExpectationsStars

authorCity

Permet de mieux régler la position de certains couteaux. Le couteau ne bouge pas.

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

TSPROF Double Fillet Clamp PT1900060 clamps

TSPROF Double Fillet Clamp PT1900060 clamps

Full description

Specifications

Also popular

Reviews

Specifications

General information

Dimensions & weight

Material

Features & functions

Recommended combi-deals

TSPROF Double Fillet Clamp PT1900060 clamps

TSPROF Double Fillet Clamp PT1900060 clamps

TSPROF Double Fillet Clamp PT1900060 clamps

Full description

Specifications

Also popular

Reviews

Specifications

General information

Dimensions & weight

Material

Features & functions

Recommended combi-deals

TSPROF Double Fillet Clamp PT1900060 clamps

Relevant topics