Name: Rick Hinderer XM18 3,5” Non-Flipper Spearpoint, OD Green G10, 20CV, pocket knife
Brand: Rick Hinderer Knives
SKU: HRK-XM18-35-SPSW-OD
Availability: OutOfStock

Work Sharp Professional Precision Adjust WSBCHPAJ-PRO-I sharpening system

notforsale

not_replaced_in

Rick Hinderer XM-18 3" scale, Smooth Black Micarta

Rick Hinderer Complete Stonewash Blue Titanium Hardware Set, XM18 3,5”

Rick Hinderer XM-18 3.0” scale, Textured Working Finish Titanium

Rick Hinderer Investigator Pen Titanium Bronze, tactical pen

legal_agecheck_key

KME Precision Knife Sharpening System, Diamond Stone Kit, KF-D4

productlabel

Rick Hinderer Complete Titanium Bronze Hardware Set, XM18 3.5”

Rick Hinderer Investigator Pen Titanium, Stonewash Painted, tactical pen

Rick Hinderer Spiral Investigator Pen, Titanium, Stonewash Painted, tactical pen

Spyderco Sharpmaker, 204MF

Rick Hinderer Knives Armorer’s Tool XM18 DLC Black, steel

Rick Hinderer Knives Armorer’s Tool XM18, steel

Skerper paddle strop Viking, rough, stropping paddle

Skerper Paddle Strop STP001, stropping paddle

Skerper Basic sharpening set 180/600/1000/3000 with ceramic sharpening steel, SH004

Rick Hinderer XM-18 3" scale, Smooth Burgundy Micarta

Rick Hinderer XM-18 3" scale, Smooth Natural Micarta

Skerper Maintenance Oil Pen MA002, 10 ml

Knivesandtools 550 paracord type III Military Spec , colour: Camo Green, 100 ft (30.48 m)

Handle/blade: G10 and titanium/CPM 20CV
Blade length: 9.0 cm
Weight: 155 grams

The **Rick Hinderer Xm18 3.5" Non-Flipper** is a special edition of the famous Hinderer XM18. This version only has a thumb stud, no flipper. As such this edition is a lot more rare than the normal XM18.

 The **Rick Hinderer XM-18 3.5"** is a large and solid pocket knife that is made to be used. A top-quality work knife. The finish is simply perfect; grip wherever you might need it and curved wherever possible. As such it feels amazing in hand.

 The spanto blade is made from CPM 20CV-steel. A premium type of powdered steel, which means that the steel has a very fine structure. As a result it retains its sharpness for a very long time. 20CV is also stainless.

 This is the newest generation of XM18's with the Tri-Way-Pivot system. The knife is enhanced with ball bearings but you also receive bronze and teflon washers to make sure you can decide which bearings system you prefer. There is also a steel lockbar insert which makes the lock even more sustainable.

 When opened a solid framelock neatly keeps the blade in place. A characterizing detail here is the *lockbar stabilizer*. This is a round disc on the side of the titanium handle. It ensures that you cannot overstretch the lock. You can always carry the XM-18 with you with the titanium pocket clip. This tip-down pocket clip is mounted to the right side, but with the philips screwdriver you can easily turn it into a tip-up pocket clip.

 The Rick Hinderer philosophy is: a knife is a tool that should work for you, never the other way around. For that reason Hinderer Knives are made to be used. This XM-18 is the perfect example.



Rick Hinderer XM18 3,5” Non-Flipper Spearpoint, OD Green G10, 20CV, pocket knife

colour

brand

zm_series

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

expectedRestockDate

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

bearring_type

The is the type of bearring used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearring types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearring type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Rick Hinderer XM18 3,5” Non-Flipper Spearpoint, OD Green G10, 20CV, pocket knife

Rick Hinderer XM18 3,5” Non-Flipper Spearpoint, OD Green G10, 20CV, pocket knife

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Rick Hinderer XM18 3,5” Non-Flipper Spearpoint, OD Green G10, 20CV, pocket knife

Rick Hinderer XM18 3,5” Non-Flipper Spearpoint, OD Green G10, 20CV, pocket knife

Rick Hinderer XM18 3,5” Non-Flipper Spearpoint, OD Green G10, 20CV, pocket knife

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Rick Hinderer XM18 3,5” Non-Flipper Spearpoint, OD Green G10, 20CV, pocket knife

Relevant topics