Handle/blade: titanium and walnut wood/O1
Blade length: 8.9 cm
Weight: 150 grams

The **Rick Hinder XM-18 3.5" Vintage** is a special version of the well-known Hinder XM18. For this special version Hinderer became inspired by his love for firearms. The wood that is used for the handle of weapons, combined with the classic tool steel for the blade. A Vintage edition of an incredibly modern pocket knife. A top-quality work knife. The finish is simply perfect; grip wherever you might need it and curved wherever possible. As such it feels amazing in hand. When opened the flipper will keep your hands away from the edge. As such you never have to worry about slipping during the more demanding cutting tasks.

 The bowie blade is made from O1 tool steel. Not stainless, but tough and easy to sharpen. With the right heat treatment it is a great type of steel to work with. In between the flipper and the edge you can find a finger choil. With it you have more control over the blade during the more detailed tasks. In addition, it looks amazing!

 You easily open the XM18 with the (double) thumb studs, or with the flipper. With a small wrist movement you can easily open the blade. The knife has been enhanced with ball bearings which make sure the knife moves smoothly. However, it also comes with teflon and phosphor bronze washers. This is the Hinderer Tri-Way pivot system.

 When opened a solid framelock neatly keeps the blade in place. A characterizing detail here is the *lockbar stabilizer*. This is a round disc on the side of the titanium handle. It ensures that you cannot overstretch the lock. In addition, these Gen6 edition has been enhanced with a steel lockbar insert. You can always carry the XM-18 with you with the titanium pocket clip. This tip-down pocket clip is mounted to the right side, but with the philips screwdriver you can easily turn it into a tip-up pocket clip.

 The Rick Hinderer philosophy is: a knife is a tool that should work for you, never the other way around. For that reason Hinderer Knives are made to be used. This XM-18 is the perfect example. This Vintage edition is enhanced with a unique serial number, starting with a V.



Rick Hinderer XM-18 Bowie Vintage 3.5" Gen6 Smooth Walnut pocket knife

brand

colour

zm_series

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

notforsale

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

not_replaced_in

expectedRestockDate

legal_agecheck_key

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

Material

bearring_type

The is the type of bearing used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearing types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearing type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Rick Hinderer XM-18 Bowie Vintage 3.5" Gen6 Smooth Walnut pocket knife