Name: Rick Hinderer Eklipse 3.0” Spanto, CPM S35VN, OD Green pocket knife
Brand: Rick Hinderer Knives
SKU: HRK-EK-3-SW-OD
Availability: OutOfStock

Work Sharp Professional Precision Adjust WSBCHPAJ-PRO-I sharpening system

notforsale

not_replaced_in

productlabel

Knivesandtools 550 paracord type III Military Spec , colour: Camo Green, 100 ft (30.48 m)

Rick Hinderer Eklipse 3.5” scale, Textured Battle Blue Titanium

Rick Hinderer Eklipse 3.5” scale, Textured Battle Bronze Titanium

Rick Hinderer Eklipse 3.5” scale, Textured Stonewash Titanium

Rick Hinderer Investigator Pen Titanium Bronze, tactical pen

legal_agecheck_key

KME Precision Knife Sharpening System, Diamond Stone Kit, KF-D4

Rick Hinderer Investigator Pen Titanium, Stonewash Painted, tactical pen

Rick Hinderer Spiral Investigator Pen, Titanium, Stonewash Painted, tactical pen

Spyderco Sharpmaker, 204MF

Work Sharp WSKTS2 Knife & Tool Sharpener MK2

Rick Hinderer Complete Titanium Stonewashed Hardware Set, Eklipse 3.5" 

Rick Hinderer Knives Armorer’s Tool XM18 DLC Black, steel

Rick Hinderer Knives Armorer’s Tool XM18, steel

Skerper paddle strop Viking, rough, stropping paddle

Skerper Paddle Strop STP001, stropping paddle

Skerper Basic sharpening set 180/600/1000/3000 with ceramic sharpening steel, SH004

Skerper Maintenance Oil Pen MA002, 10 ml

Knivesandtools 550 Paracord Type III Military Spec RG1167H, foliage, 100 ft (30.48 m)

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

Handle/blade: G10/CPM S35VN
Blade length: 8.0 cm
Weight: 120 grams

The **Rick Hinderer Eklipse 3.0"** is a cool EDC pocket knife, based on an old acquaintance. The Hinderer Eklipse is a popular and relatively rare pocket knife from 2014 which is known as the basis design for the Zero Tolerance 0392 collection. Hinderer took that design and turned it into a 3.0" version. A slightly more compact and light-weight option with a couple of subtle differences.

 The Rick Hinderer Eklipse 3.0 can be opened with the flipper or thumb stud. Both work perfectly. The Eklipse 3.0 is enhanced with Hinderer's Tri-Way-Pivot. This means that the pocket knife is enhanced with ball bearings, but that it also comes with phosphor bronze and teflon washers. As such you can determine yourself which bearings you prefer.

 The blade is made from CPM S35VN-steel. A premium type of steel that retains its sharpness well. Hinderer used a linerlock for the Eklipse. As such your fingers will always be safe during use.

 The handle is made from thick steel liners with G10 on top. Because of the bevelled edges it feels amazing in hand. The pocket clip is mounted for right-handed/tip-up use.

 The Rick Hinderer philosophy is: a knife is a tool that should work for you, never the other way around. For that reason Hinderer Knives are made to be used. The Eklipse is a perfect example of this sentiment.



Rick Hinderer Eklipse 3.0” Spanto, CPM S35VN, OD Green pocket knife

brand

colour

zm_series

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

expectedRestockDate

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

bearring_type

The is the type of bearring used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearring types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearring type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Rick Hinderer Eklipse 3.0” Spanto, CPM S35VN, OD Green pocket knife

Rick Hinderer Eklipse 3.0” Spanto, CPM S35VN, OD Green pocket knife

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Rick Hinderer Eklipse 3.0” Spanto, CPM S35VN, OD Green pocket knife

Rick Hinderer Eklipse 3.0” Spanto, CPM S35VN, OD Green pocket knife

Rick Hinderer Eklipse 3.0” Spanto, CPM S35VN, OD Green pocket knife

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Rick Hinderer Eklipse 3.0” Spanto, CPM S35VN, OD Green pocket knife

Relevant topics