Name: Reate K3 Mokuti Inlay, Droppoint CTS-204P Satin Finish pocket knife
Brand: Reate
SKU: RTK3-DP-MTI
Availability: OutOfStock
Rating: 10 (2 reviews)

Work Sharp Professional Precision Adjust WSBCHPAJ-PRO-I sharpening system

notforsale

not_replaced_in

KME Precision Knife Sharpening System, Diamond Stone Kit, KF-D4

productlabel

Spyderco Sharpmaker, 204MF

Skerper paddle strop Viking, rough, stropping paddle

Skerper Paddle Strop STP001, stropping paddle

Skerper Basic sharpening set 180/600/1000/3000 with ceramic sharpening steel, SH004

Skerper Maintenance Oil Pen MA002, 10 ml

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

Knivesandtools 550 paracord type III, colour: purple, 100 ft (30.48 m)

Knivesandtools 550 paracord type III, colour: black eye, 100 ft (30.48 m)

Nano-Oil 10w maintenance oil 8cc/8ml

Fallkniven Diamond Ceramic Whetstone DC4

Knivesandtools Knife Pouch Black, by Maxpedition

Knivesandtools EDC pouch

Ballistol maintenance oil, 50 ml

Knivesandtools Knife Patch, Padraig Croke design

Handle/Blade: mokuti and titanium/CTS-204P
Blade length: 9.8 cm
Weight: 170 grams



The **Reate K3** is a high-quality modern pocket knife with excellent craftsmanship. This is an incredibly well-made knife. It marks a new milestone in Reate's progressive production process, which it is constantly refining.



Reate has peppered the K3 with techniques and high-quality finishes as if they were nothing. Take a quick look at the design of the pivot and you'll see what we mean. The contours of the handle and the clean lines of the blade are sublime. The differences in finish on the blade also show that they really know what they're doing at Reate. Many Western producers can only dream of this quality. And all that from a production knife! 



The blade is made from Carpenter CTS-204P steel, a stainless powder steel made in the United States. It is incredibly stainless and has excellent sharpness retention. The beautiful hollow grind has a lovely satin finish in two directions. The jimping on the spine of the blade is also stunning. A seemingly minimal element in the overall knife, but the little knurls have been made in a really difficult way. It's a great detail that will definitely be appreciated by true enthusiasts.


You open the blade with the flipper. The ceramic detent (which typically holds the blade in the handle) is perfectly adjusted. Sturdy enough to flip easily, but soft enough to feel pleasant against your finger. The ceramic ball bearings around the pivot allow the knife to open super smoothly. When opened, the blade is locked in place by a solid frame lock. As we've come to expect from Reate, the lockbar has a steel insert. This prevents the lock from going too far, so it will stay in great condition for years to come.




The Reate K3 comes in a luxurious storage case. This includes an additional pouch with two steel rings and some extra screws. So if you ever damage one of the screws, you already own a couple of spares. Very user-friendly!




Reate K3 Mokuti Inlay, Droppoint CTS-204P Satin Finish pocket knife

handle_material

brand

colour

zm_series

handedness

blade_finish

opening_system

knife_edge_type

material_sheath

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

expectedRestockDate

legal_agecheck_key

orderNumber

reaction

reviewDate

valueForMoneyStars

meetsExpectationsStars

authorCity

Puissant et elegant : le Mokuti fait penser à un vitrail 
Technicite et originalite font un excellent choix

Het Mokuti is prachtig: het is Damascus gemaakt van T
verschillende lagen titanium (en titanium voor de rest). Door het etsen is het meerkleurig. Mokume (dan worden er koperlegeringen gebruikt) is dat ook maar dan meer in de zelfede kleurtoon (geel tot tood).. De  kleur van de inlays is mooi, maar gevoelig voor vingerafdrukken. (niet zwaar maar wel zichtbaar).

Vol vinger afdrukken valt dit niet op. De keuze is dus of schoonmaken na iedere keer of niet. Mijn Keuze is poetsen...

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Reate K3 Mokuti Inlay, Droppoint CTS-204P Satin Finish pocket knife

Reate K3 Mokuti Inlay, Droppoint CTS-204P Satin Finish pocket knife

Full description

Specifications

Reviews

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Reate K3 Mokuti Inlay, Droppoint CTS-204P Satin Finish pocket knife

Reate K3 Mokuti Inlay, Droppoint CTS-204P Satin Finish pocket knife

Reate K3 Mokuti Inlay, Droppoint CTS-204P Satin Finish pocket knife

Full description

Specifications

Reviews

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Reate K3 Mokuti Inlay, Droppoint CTS-204P Satin Finish pocket knife

Relevant topics