Name: Reate K1 CF Satin Finish pocket knife
Brand: Reate
SKU: RTK1-CF-SF
Availability: OutOfStock

Work Sharp Professional Precision Adjust WSBCHPAJ-PRO-I sharpening system

notforsale

not_replaced_in

KME Precision Knife Sharpening System, Diamond Stone Kit, KF-D4

productlabel

Spyderco Sharpmaker, 204MF

Skerper paddle strop Viking, rough, stropping paddle

Skerper Paddle Strop STP001, stropping paddle

Skerper Basic sharpening set 180/600/1000/3000 with ceramic sharpening steel, SH004

Skerper Maintenance Oil Pen MA002, 10 ml

Spyderco Bead BEAD5LY Flat Bead Pewter with lanyard

Knivesandtools 550 paracord type III, fish and fire paracord, 100 ft (30.48 m)

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

Nano-Oil 10w maintenance oil 8cc/8ml

Fallkniven Diamond Ceramic Whetstone DC4

Knivesandtools Knife Pouch Black, by Maxpedition

Knivesandtools EDC pouch

Ballistol maintenance oil, 50 ml

Knivesandtools Knife Patch, Padraig Croke design

Handle/blade: carbon fiber and titanium/RWL34
Blade length: 9,8 cm
Weight: 140 grams



The **Reate K1** is a sleek, stylish pocket knife of the highest class. The handle is milled from titanium and has carbon fibre inlays. The precision of the inlays connecting to the handle is truly exemplary. This is the common thread that runs through all Reate Knives: precision.




The blade is made from RWL34 steel, a stainless powder steel made by the steel experts at Damasteel. The beautiful hollow grind has a lovelysatin finish in two directions. The rounding of the back and the subtle jimping are hallmarks of pure quality. You open the blade with the flipper. The ceramic detent (which typically holds the blade in the handle) is perfectly adjusted. Sturdy enough to flip easily, but soft enough to feel pleasant against your finger. The ceramic ball bearings around the pivot allow the knife to open super smoothly. When opened, the blade is locked in place by a solid frame lock. As we've come to expect from Reate, the lockbar has a steel insert. This prevents the lock from going too far, so it will stay in great condition for years to come.




At first glance, the K1 seems a bit less extravagant than other knives in the Reate range. But this doesn't mean that the K1 has received any less of Reate's unparalleled attention to detail. For instance, the pocket clip looks quite modest at first. But when you look closely you can see how cleverly it has been designed. It falls neatly into a recess in the titanium handle and is fitted with a ceramic ball. This helps to protect your pocket. The lanyard hole also has a very sleek finish. 




The Reate K1 comes in a luxurious storage case. This includes an additional pouch with two steel rings and some extra screws. So if you ever damage one of the screws, you already own a couple of spares. Very user-friendly!




Reate K1 CF Satin Finish pocket knife

Reate K1 CF, M390 Satin Finish pocket knife

colour

handedness

blade_finish

opening_system

handle_material

knife_edge_type

material_sheath

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

brand

zm_series

expectedRestockDate

legal_agecheck_key

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Reate K1 CF Satin Finish pocket knife

Reate K1 CF Satin Finish pocket knife

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Reate K1 CF Satin Finish pocket knife

Reate K1 CF Satin Finish pocket knife

Reate K1 CF Satin Finish pocket knife

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Reate K1 CF Satin Finish pocket knife

Relevant topics