Name: LionSteel KUR BBR blackwashed, bruin G10
Brand: Lionsteel
SKU: LI-KUR-BBR
Price: 212 EUR
Availability: BackOrder

Work Sharp Professional Precision Adjust WSBCHPAJ-PRO-I sharpening system

notforsale

not_replaced_in

LionSteel KUR UL pocket knife, olive wood

legal_agecheck_key

LionSteel Eggie Blue Titanium EG-BL keychain bit set and multi-tool

LionSteel Eggie Bronze Titanium EG-BR keychain bit set and multi-tool

Skerper Paddle Strop STP001, stropping paddle

Skerper paddle strop Viking, rough, stropping paddle

Skerper Basic sharpening set 180/600/1000/3000 with ceramic sharpening steel, SH004

Spyderco Sharpmaker, 204MF

productlabel

LionSteel 900FDV1 CR belt sheath large, cordura

Knives and Tools Knife Cleaning Mat, rubber

LionSteel 900FD01 PL sheath large, black leather

LionSteel 900FDV1 PL belt sheath large, black leather

Skerper Maintenance Oil Pen MA002, 10 ml

Knivesandtools 550 Paracord Type III Military Spec RG1168H, coyote, 100 ft (30.48 m)

Spyderco Bead BEAD5LY Flat Bead Pewter with lanyard

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

Knivesandtools Knife Patch, Padraig Croke design

Knivesandtools Skull Patch, Padraig Croke design

Knivesandtools #MatchPatch, #01 OG-Green, patch

Handle/blade: G10/Sleipner
Blade length: 8,6 cm
Weight: 161 gram

The **LionSteel KUR** is a very nice Italian pocket knife, designed by Michele "Moletta" Pensato. The lining in the design is really beautiful. This typical example of Italian design not only looks great but lies great in the hand.


The blade is made of Austrian Sleipner steel. This is a tool steel type which is known for its balance between sharpness preservation and sturdiness. Be careful with moisture and fruity acids because this type of steel is only partially stainless. As long as you clean and dry it after use you’ll be okay. The have chosen for a tough stonewashed finish one the blade. This is very forgiving when it comes to wear and tear. An ideal choice for an EDC!


The blade runs very smoothly because of the ball bearings and it opens quickly via the flipper. In opened position the blade is held in place by a solid liner-lock. A fun technical detail is that the KUR has a ceramic detent ball. Ceramic is harder than steel and therefore prevents any wear and tear over time.


To carry the LionSteel KUR with you can use the subtle pocket clip. This way you can wear the KUR deep inside your pocket. They have concealed how it is attached to the knife in the titanium backspacer. No more ugly empty screw holes! The LionSteel KUR is a great knife for EDC. Epitome of Italian design combined with technical perfection.




LionSteel KUR BBR blackwashed, bruin G10

brand

colour

zm_series

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

expectedRestockDate

videos

msrp_price

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

bearring_type

The is the type of bearing used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearing types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearing type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

LionSteel KUR BBR blackwashed, bruin G10

LionSteel KUR BBR blackwashed, bruin G10

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

LionSteel KUR BBR blackwashed, bruin G10

LionSteel KUR BBR blackwashed, bruin G10

LionSteel KUR BBR blackwashed, bruin G10

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

LionSteel KUR BBR blackwashed, bruin G10

Relevant topics