Name: GiantMouse ACE Farley V2 BRASS-B-GRN Stonewashed Elmax, Brass Bolster, Green Micarta, pocket knife, Ansø and Voxnaes design
Brand: GiantMouse
SKU: GM-FARLEY-BRASS-B-GRN
Price: 213 EUR
Availability: InStock

The **GiantMouse ACE Farley V2 BRASS-B-GRN Stonewashed Elmax, Brass Bolster, Green Micarta, pocket knife** is a sleek and compact slipjoint pocket knife designed by Jens Ansø and Jesper Voxnaes. Like the original Farley, this V2 honours the long tradition of slipjoint pocket knives. The name refers to a favourite restaurant of the designers: the Farley Bar in Sausalito, California, near the Golden Gate Bridge.

## GiantMouse ACE Farley V2: what's new?
This new release retains the Farley's distinctive profile, but gives the knife an updated look thanks to the addition of bolsters. 

The GiantMouse Ace Farley V2 is available in two variants: the GiantMouse ACE Farley V2 with a combination of carbon fibre and titanium offering a modern, sleek look. Then there's the GiantMouse ACE Farley V2 with green micarta and brass bolsters for a classic, vintage look. Both versions feature a high-quality ELMAX steel blade, which guarantees excellent cutting performance and durability.

### GiantMouse ACE Farley
The Farley's design was inspired by concept cars from the 1960s. When you place the knife next to a picture of one of these iconic cars, the similarities are immediately apparent: the sleek, aerodynamic lines, the smooth ergonomic shapes and even the screws, reminiscent of the positioning of hubcaps. 

Everything has been thought through, making the Farley a ‘classic in the making’. This knife inspires appreciation for the finer things in life - a knife to be proud of. Whether as an everyday companion or a showpiece in a display case, the Farley is perfect for any knife fan. You carry the Farley with the stylish wire clip. This can be changed for either right-handed or left-handed use.

GiantMouse ACE Farley V2 BRASS-B-GRN Stonewashed Elmax, Brass Bolster, Green Micarta, pocket knife, Ansø and Voxnaes design

handle_material

GiantMouse ACE Farley V2 TI-B-CF Satin Elmax, Titanium Bolster, Carbon Fiber, pocket knife, Ansø and Voxnaes design

colour

handedness

blade_finish

opening_system

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

brand

zm_series

legal_agecheck_key

notforsale

not_replaced_in

expectedRestockDate

msrp_price

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

Material

bearring_type

The is the type of bearing used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearing types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearing type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

GiantMouse ACE Farley V2 BRASS-B-GRN Stonewashed Elmax, Brass Bolster, Green Micarta, pocket knife, Ansø and Voxnaes design