Name: Flytanium Thumbstud Kit For Benchmade FLY-0719 Copper
Brand: Flytanium
SKU: FLY-0719
Price: 14.45 EUR
Availability: InStock

Ballistol maintenance oil, 50 ml

notforsale

not_replaced_in

productlabel

Knivesandtools EDC pouch

Böker adhesive for screws 09BO753

CRKT Hex Bit Driver Tool Roll 9911 screwdriver set

Böker Plus Tool Pen 09BO084, screwdriver

KNAFS Torx Bit Driver KNAFS-00123 screwdriver

Kershaw TX-Tool screwdriver

Knivesandtools Knife Patch, Padraig Croke design

Knivesandtools Skull Patch, Padraig Croke design

Knivesandtools #OneKnifeStand, knife stand

Knivesandtools #EveryDayCloth, micro-fibre cloth

Knivesandtools Logo Pin

Knivesandtools Sticker Set #02, Padraig Croke design

This **Flytanium Thumb Stud Kit for Benchmade pocket knives** is a cool addition to your Benchmade pocket knife. Perhaps because you have lost your original thumb stud, perhaps because you want a little bit of colour. Tips when removing the original thumb stud: put the blade in a cup of hot water up to the thumb stud. This makes it easier to remove. To remove it you use a Torx-T6 screwdriver.

This thumb stud is compatible with the following models: Bugout, Mini Bugout, Bailout, 94-collection, Griptilian, Mini Griptilian, Mini Crooked River and Mini Freek.

It is also compatible with the following models. Do keep in mind, however, that it will be a little shorter: North Fork Folder, Vallation, Mini Vallation, Triage, Adamas, Contego, Mini Barrage, Boost and Emissary.

It is NOT compatible with the Benchmade Valet and Nakamura.

## Tips when installing

Adding new accessories isn't without risk! To prevent damage to screws and scales, always use suitable screwdrivers and never force anything. We prefer to add a piece of a plastic bag in between the bit and the screw to prevent any damage to the screws. If the screws are stuck, it is important not to force them. Carefully heat them with a hairdryer or tap the back of the screwdriver to break the loctite.

Also check the warranty conditions of the manufacturer: for some brands the warranty expires the moment you start working on the knife yourself. You add the scales at your own risk. We are not liable for damages that you may cause to the knife or accessory.


Flytanium Thumbstud Kit For Benchmade FLY-0719 Copper

handle_material

Flytanium Thumbstud Kit For Benchmade FLY-0720 Brass

colour

value_weight

brand

zm_series

expectedRestockDate

msrp_price

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Flytanium Thumbstud Kit For Benchmade FLY-0719 Copper

Flytanium Thumbstud Kit For Benchmade FLY-0719 Copper

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Recommended combi-deals

Flytanium Thumbstud Kit For Benchmade FLY-0719 Copper

Flytanium Thumbstud Kit For Benchmade FLY-0719 Copper

Flytanium Thumbstud Kit For Benchmade FLY-0719 Copper

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Recommended combi-deals

Flytanium Thumbstud Kit For Benchmade FLY-0719 Copper

Relevant topics