Name: CRKT Up & At 'Em 7076 pocket knife
Brand: CRKT
SKU: CK-7076
Price: 59.95 EUR
Availability: BackOrder
Rating: 9 (1 reviews)

Knives and Tools Knife Cleaning Mat, rubber

productlabel

notforsale

not_replaced_in

Work Sharp WSKTS2 Knife & Tool Sharpener MK2

CRKT Driver And Bit Storage Block 9916 Aluminum, bit driver and bit holder, Joe Wu design

CRKT Williams Defense Pen, Black Aluminum, tactical pen, James Williams design

legal_agecheck_key

CRKT Williams Defense Pen, OD Green, tactical pen James Williams design

CRKT Hex Bit Driver Tool Roll 9911 screwdriver set

CRKT Collet Pen TPENWU Aluminium, tactical pen

Skerper Maintenance Oil Pen MA002, 10 ml

Skerper Pocket Strop STP002, stropping paddle

CRKT Nathan’s Knife Kit 1032 DIT kit wooden pocket knife

Knivesandtools 550 Paracord Type III Military Spec RG1167H, foliage, 100 ft (30.48 m)

Skerper Pocket Stone diamond/ceramic sharpening stone, SO003

Skerper Basic sharpening pen with a diamond steel, SO001

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

Knivesandtools 550 paracord type III, colour: acu, 100 ft (30.48 m)

Knivesandtools Knife Patch, Padraig Croke design

Knivesandtools Skull Patch, Padraig Croke design

Knivesandtools Knife Pouch Black, by Maxpedition

Knivesandtools EDC pouch

Handle/blade: stainless steel/8Cr13MoV
Blade length: 9.2 cm
Weight: 125 grams

The **CRKT Up & At 'Em 7076** is a stylish EDC pocket knife, made to easily carry out your daily tasks. The name already says it all. This pocket knife is the perfect companion for anyone who loves a challenge. Roll up your sleeves and get to work!

 The handle is made from stainless steel and has a stunning satin-finish. Great details are the decorated pivot and the end of the handle which has been enhanced with milled lines. You easily open the blade of the CRKT Up & At 'Em with the royal flipper which, when opened, makes sure that your finger doesn't slip towards the blade. Better safe than sorry! A solid framelock locks the blade when opened and the finger grooves take care of great grip.

 With the deep-carry pocket clip you can comfortably and discretely carry the Up & At 'Em. Because of the slim design the knife won't take up much room and will leave you with enough room in your pocket for things like your wallet.



CRKT Up & At 'Em 7076 pocket knife

brand

colour

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

expectedRestockDate

msrp_price

valueForMoneyStars

meetsExpectationsStars

authorCity

- ik waardeer dit type zakmes, mooi gepolijst, heel cool (letterlijk & figuurlijk), puur metaal met een stevig frame-lock, ligt in de lijn van modellen die je ook vind bij Ruike en Kershaw

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

bearring_type

The is the type of bearing used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearing types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearing type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

CRKT Up & At 'Em 7076 pocket knife

CRKT Up & At 'Em 7076 pocket knife

Full description

Specifications

Reviews

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

CRKT Up & At 'Em 7076 pocket knife

CRKT Up & At 'Em 7076 pocket knife

CRKT Up & At 'Em 7076 pocket knife

Full description

Specifications

Reviews

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

CRKT Up & At 'Em 7076 pocket knife

Relevant topics