Name: CRKT Hyperspeed 7020 pocket knife
Brand: CRKT
SKU: CK-7020
Price: 64.95 EUR
Availability: BackOrder

Knives and Tools Knife Cleaning Mat, rubber

productlabel

notforsale

not_replaced_in

CRKT Driver And Bit Storage Block 9916 Aluminum, bit driver and bit holder, Joe Wu design

CRKT Williams Defense Pen, Black Aluminum, tactical pen, James Williams design

legal_agecheck_key

CRKT Williams Defense Pen, OD Green, tactical pen James Williams design

CRKT Hex Bit Driver Tool Roll 9911 screwdriver set

CRKT Collet Pen TPENWU Aluminium, tactical pen

Skerper Maintenance Oil Pen MA002, 10 ml

Spyderco Bead BEAD5LY Flat Bead Pewter with lanyard

Skerper Pocket Strop STP002, stropping paddle

CRKT Nathan’s Knife Kit 1032 DIT kit wooden pocket knife

Knivesandtools 550 paracord type III, fish and fire paracord, 100 ft (30.48 m)

Skerper Pocket Stone diamond/ceramic sharpening stone, SO003

Skerper Basic sharpening pen with a diamond steel, SO001

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

Knivesandtools Knife Patch, Padraig Croke design

Knivesandtools Skull Patch, Padraig Croke design

Knivesandtools Knife Pouch Black, by Maxpedition

Knivesandtools EDC pouch

Handle/blade: GRN/8Cr14MoV
Blade length: 9.2 cm
Weight: 105 grams

The **CRKT Hyperspeed 7020** is a cool and super functional EDC knife. With the assisted-openings mechanism you can quickly open the Hyperspeed. You can easily do so with the thumb stud. The Hyperspeed got its name because you can quickly carry out any task with this pocket knife. The 8Cr13MoV-steel blade is incredibly sharp and perfect when opening boxes or cutting a piece of rope.

 The handle is made from GRN and enhanced with an interesting pixel-like pattern. You can comfortably and discretely carry the CRKT Hyperspeed with the deep-carry pocket clip. Because of the slim design the Hyperspeed won't take up much room and will leave you with enough room in your pocket for thinks like your wallet or flashlight.



CRKT Hyperspeed 7020 pocket knife

brand

colour

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

expectedRestockDate

msrp_price

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

bearring_type

The is the type of bearing used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearing types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearing type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

CRKT Hyperspeed 7020 pocket knife

CRKT Hyperspeed 7020 pocket knife

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

CRKT Hyperspeed 7020 pocket knife

CRKT Hyperspeed 7020 pocket knife

CRKT Hyperspeed 7020 pocket knife

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

CRKT Hyperspeed 7020 pocket knife

Relevant topics