Name: CRKT Homefront Tactical K260KKS pocket knife, Ken Onion design
Brand: CRKT
SKU: CK-K260KKS
Availability: BackOrder

Work Sharp Professional Precision Adjust WSBCHPAJ-PRO-I sharpening system

notforsale

not_replaced_in

Knives and Tools Knife Cleaning Mat, rubber

productlabel

CRKT Williams Defense Pen, Black Aluminum, tactical pen, James Williams design

legal_agecheck_key

CRKT Driver And Bit Storage Block 9916 Aluminum, bit driver and bit holder, Joe Wu design

Skerper paddle strop Viking, rough, stropping paddle

Skerper Paddle Strop STP001, stropping paddle

Skerper Basic sharpening set 180/600/1000/3000 with ceramic sharpening steel, SH004

CRKT Veff Sharp Sharpener VEFF1 diamant 600 grit, sharpening steel set

CRKT BoltLiner Pen TPENBOND3 Gray Aluminum pen, Mike Bond design

CRKT Williams Defense Pen, OD Green, tactical pen James Williams design

CRKT Hex Bit Driver Tool Roll 9911 screwdriver set

Spyderco - Ceramic File Set

Skerper Maintenance Oil Pen MA002, 10 ml

Spyderco Bead BEAD5LY Flat Bead Pewter with lanyard

CRKT Nathan’s Knife Kit 1032 DIT kit wooden pocket knife

Knivesandtools 550 paracord type III, fish and fire paracord, 100 ft (30.48 m)

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

Knivesandtools Knife Patch, Padraig Croke design

Knivesandtools Skull Patch, Padraig Croke design

Handle/blade: FRN/4116
Blade length: 8,7 cm
Weight: 120 grams



The **CRKT Homefront Tactical** is a unique pocket knife designed by Ken Onion. At first glance this knife might seem a little simple: a design that was inspired by knives used during the war, flipper, tanto-blade: that's it. All great until you have used it for a while and decide it needs to be cleaned: that is when you realize what an amazing design this is. You can take it apart in only thirty seconds and reassemble it in the same amount of time. Seriously? Yes, seriously.




This, by Ken Onion, patented Field Strip Technology is so simple it is hard to imagine that it didn't exist yet. Turn a latch, loosen the wheel: open. You clean it and repeat the process, but then reversed. Within thirty seconds it will be fully assembled again. Perfect when you work in surroundings where dirt is a problem. Think of soldiers, mechanics and hunters.



 The blade is made from 4116 German steel. A very tough type of stainless steel. Easy to sharpen, ideal for a knife that is used a lot. The flipper opens the blade with a firm click. When opened the linerlock keeps the blade in place. The handle is made from FRN. This is fibreglass-reinforced nylon. Incredibly strong and light-weight.




CRKT Homefront Tactical K260KKS pocket knife, Ken Onion design

brand

colour

zm_series

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

expectedRestockDate

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

bearring_type

The is the type of bearing used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearing types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearing type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

CRKT Homefront Tactical K260KKS pocket knife, Ken Onion design

CRKT Homefront Tactical K260KKS pocket knife, Ken Onion design

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

CRKT Homefront Tactical K260KKS pocket knife, Ken Onion design

CRKT Homefront Tactical K260KKS pocket knife, Ken Onion design

CRKT Homefront Tactical K260KKS pocket knife, Ken Onion design

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

CRKT Homefront Tactical K260KKS pocket knife, Ken Onion design

Relevant topics