Name: Buck 283 Nano Bantam 0283BKS-B, black
Brand: Buck
SKU: BUCK0283BKS-B
Price: 21.9 EUR
Availability: BackOrder
Rating: 9.66667 (6 reviews)

Work Sharp Precision Adjust sharpening system, WSBCHPAJ

notforsale

not_replaced_in

Knives and Tools Knife Cleaning Mat, rubber

Work Sharp Angle Set knife sharpener, WSBCHAGS

Skerper Maintenance Oil Pen MA002, 10 ml

Spyderco Bead BEAD5LY Flat Bead Pewter with lanyard

Knivesandtools 550 Paracord Type III Military Spec RG1164H, black, 100 ft (30.48 m)

Skerper Pocket Stone diamond/ceramic sharpening stone, SO003

productlabel

Skerper Basic sharpening pen with a diamond steel, SO001

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

Nano-Oil 10w maintenance oil 8cc/8ml

Knivesandtools Knife Patch, Padraig Croke design

Knivesandtools Skull Patch, Padraig Croke design

Knivesandtools #MatchPatch, #01 OG-Green, patch

Knivesandtools Knife Pouch Black, by Maxpedition

Knivesandtools EDC pouch

Ballistol maintenance oil, 50 ml

Knivesandtools #OneKnifeStand, knife stand

Knivesandtools 550 paracord type III, colour: olive drab, 100 ft (30.48 m)

Handle/Blade: FRN/420HC steel
Blade length: 4.7 cm
Weight: 20 grams

The **Buck Bantam Nano 283** is a small pocket knife with an excellent price-quality ratio. It is compact, light-weight and great for daily use. The handle is made from FRN: a fibreglass reinforced plastic. Because Buck used 420HC steel for the blade and used the famous BOS heat treatment it will retain its sharpness for a really long time. This knife is made in the United States. As such, you get a lot of knife for little money.




Buck 283 Nano Bantam 0283BKS-B, black

brand

colour

zm_series

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

expectedRestockDate

legal_agecheck_key

msrp_price

orderNumber

reaction

reviewDate

valueForMoneyStars

meetsExpectationsStars

authorCity

Ik guts ermee in hout,
al leuke kleine zwaardjes uitgesneden.
Ik ben heel tevreden over het mesje en de service.

Prima mesje, had er een 35 jaar geleden in USA gekocht en die voldoet nog steeds.

De kwaliteit lijkt goed te zijn.
Mooi formaat voor aan de sleutelbos, je merkt amper dat hij aan de sleutelbos hangt.
Redelijk scherp geleverd.
Leuk mesje als back-up.
Was netjes en op tijd bezorgd.
Ben zeer tevreden.

Lost my original one, and missed it so much I bought another the same to replace it. Not too big and is just right for me.

Levering:  was zeer snel, op Zondag besteld op Maandagmiddag was het al binnen.

Mes: Het is precies wat ik wilde, klein maar fijn.

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Buck 283 Nano Bantam 0283BKS-B, black

Buck 283 Nano Bantam 0283BKS-B, black

Full description

Specifications

Reviews

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Buck 283 Nano Bantam 0283BKS-B, black

Buck 283 Nano Bantam 0283BKS-B, black

Buck 283 Nano Bantam 0283BKS-B, black

Full description

Specifications

Reviews

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Buck 283 Nano Bantam 0283BKS-B, black

Relevant topics