Name: Beavercraft P03 Polishing Compounds 3 Part Set, 28, 14 and 7 micron
Brand: BeaverCraft
SKU: BVP03
Price: 12.95 EUR
Availability: BackOrder

The **Beavercraft P03 Polishing Compounds 3 Part Set, 28, 14 and 7 microns** is a set of polishing compounds you use to polish the hard steel of your wood carving knives. The mixture is intended for finishing cutting tools that require high precision reworking, perfect for polishing an edge after you have sharpened it. 

With three different colours and grain sizes, these compounds cover all your polishing needs. The grain size of the white compound is approximately 28 microns. The grit size of the red compound is about 14 micron, the grit size of the green compound is between 5 an 7 micron. 

## How to use the Beavercraft Polishing Compound

You use this polishing compound in combination with a strop. A strop is a sharpening tool usually consisting of a piece of wood and a piece of leather. You add the compound to the surface of the leather, covering the entire thing. Then, applying light pressure, draw your tool along the leather. Always strop in the direction of the spine of the blade, so you don't cut into the leather. 

You don't have to apply the compound often. This depends on how often you use the strop. Add more compound if the performance of the strop decreases. Usually reapplication every few weeks is sufficient.

Beavercraft P03 Polishing Compounds 3 Part Set, 28, 14 and 7 micron

value_weight

Beavercraft P01 Small Polishing Compound Green, 7 micron

colour

grit_micron

grit_size_kato

stone_abrasive

gritsize_compound

value_number

Beavercraft P02 Big Polishing Compound Green, 7 micron

brand

notforsale

not_replaced_in

expectedRestockDate

msrp_price

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

The material that gives the sharpening stone its abrasive effect. Diamond, ceramics (e.g. aluminium oxide or silicon carbide) or the materials in a natural stone. Read [more about the advantages and disadvantages of these materials](/en/ct/sharpening-stone-materials-which-are-the-best.htm).

Abrasive

Material

strop_type

The grain size we give to a sharpening stone. We test all sharpening stones ourselves and add an appropriate grain size on the basis of this test. From extra coarse to ultra fine.

Beavercraft P03 Polishing Compounds 3 Part Set, 28, 14 and 7 micron