Name: The James Brand County Black, ebony, pocket knife
Brand: The James Brand
SKU: JAKCOU2201
Availability: BackOrder

Handle/blade: ebony/12C27
Blade length: 6.2 cm
Weight: 55 grams

**The James Brand County** is a modern take on the classic grandfather’s knife: the slipjoint. A great knife to peel an apple with or open a box. In addition to a functional tool, an indispensable EDC tool, the County is also an elegant accessory to accompany your outfit.


The James County has been enhanced with a modest blade, made from Sandvik 12C27 steel. A Swedish type of stainless steel which perfectly retains its sharpness. You open it with two hands. It doesn’t really block, but a slipjoint will keep it in place. Think of a Swiss pocket knife which uses the same system.


A real eye catcher on The James Brand County is the stunning handle. The ebony makes the knife look incredibly luxurious. An exquisite gentleman’s knife for everyday use!


However, the elegant James design has not only been applied to the knife itself. Just look at the box it comes in: perfect in all its simplicity. A milled wooden box covered by a modern cardboard sleeve. But that is not all, it comes with a felt storage pouch with, again, that bright green accent.


## The James Brand: knives for anyone who lives life to the fullest


The people behind The James Brand do not have roots in the pocket knife world. They are skaters, snowboarders, fishermen, barbers, photographers. People who do not only spend their time at the drawing board, but actually go out into the world. People who do not wait for others to solve their problems but take the initiative. They have a different view on what a pocket knife should look like all their own. Never inhibited by thoughts like “that’s just the way it is” they started designing. The result is a stylish and unique pocket knife brand. Made for adventurers and anyone who loves design. Made for real people!



The James Brand County Black, ebony, pocket knife

brand

colour

zm_series

handedness

blade_finish

opening_system

handle_material

knife_edge_type

material_sheath

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

notforsale

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

not_replaced_in

expectedRestockDate

legal_agecheck_key

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

Material

bearring_type

The is the type of bearing used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearing types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearing type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

The James Brand County Black, ebony, pocket knife