Name: Reate JACK 2.0 Brown Micarta Grey, M390 Handrubbed pocket knife with comb
Brand: Reate
SKU: RT-J2-BM-G
Availability: OutOfStock

Work Sharp Professional Precision Adjust WSBCHPAJ-PRO-I sharpening system

notforsale

not_replaced_in

Knivesandtools Knife Pouch Black, by Maxpedition

KME Precision Knife Sharpening System, Diamond Stone Kit, KF-D4

productlabel

Spyderco Sharpmaker, 204MF

Skerper paddle strop Viking, rough, stropping paddle

Skerper Paddle Strop STP001, stropping paddle

Skerper Basic sharpening set 180/600/1000/3000 with ceramic sharpening steel, SH004

Skerper Maintenance Oil Pen MA002, 10 ml

Knivesandtools 550 Paracord Type III Military Spec RG1168H, coyote, 100 ft (30.48 m)

Knivesandtools 550 Paracord Type III Military Spec RG1167H, foliage, 100 ft (30.48 m)

Nano-Oil 10w maintenance oil 8cc/8ml

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

Fallkniven Diamond Ceramic Whetstone DC4

Knivesandtools EDC pouch

Ballistol maintenance oil, 50 ml

Knivesandtools 550 paracord type III, colour: black, 100 ft (30.48 m)

Knivesandtools 550 paracord type III, colour: olive drab, 100 ft (30.48 m)

Knivesandtools Knife Patch, Padraig Croke design

Knivesandtools Skull Patch, Padraig Croke design

Handle/blade: titanium and micarta/M390
Blade length: 9.4 cm
Weight: 140 grams

The **Reate JACK 2.0** is a remarkable pocket knife. The handle is a so-called integral frame. This means that it was milled from one solid block of titanium. A technique Reate excels at. But that is not the most special part of the knife. That is namely the exceptional construction of the blade.

 It is namely constructed from a titanium spine to which a M390 steel blade was screwed. As such the cutting edge is sort of interchangeable. As a bonus Reate added an additional titanium comb to the Reate JACK 2.0. Loosen the screws on the spine with a Torx T8 screwdriver and use the same screws to secure the titanium comb. Genius in all its simplicity. Also think of how easy it is to sharpen the knife! Different sharpening methods can namely be used.

 The remarkable construction doesn't end with the cutting edge. A titanium interface around the pivot will wear out relatively quickly. That is why Reate added a hard M390 inlay to make sure the lock and hinges will function for years to come!

 This specific version of the Reate JACK 2.0 has a titanium frame with beadblast finish and micarta scales. The blade is satinized by hand.

 Tip from us: check with blade you installed before you try to comb your hair.

 

Reate JACK 2.0 Brown Micarta Grey, M390 Handrubbed pocket knife with comb

brand

colour

zm_series

handedness

blade_finish

opening_system

handle_material

knife_edge_type

material_sheath

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

expectedRestockDate

legal_agecheck_key

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

bearring_type

The is the type of bearring used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearring types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearring type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Reate JACK 2.0 Brown Micarta Grey, M390 Handrubbed pocket knife with comb

Reate JACK 2.0 Brown Micarta Grey, M390 Handrubbed pocket knife with comb

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Reate JACK 2.0 Brown Micarta Grey, M390 Handrubbed pocket knife with comb

Reate JACK 2.0 Brown Micarta Grey, M390 Handrubbed pocket knife with comb

Reate JACK 2.0 Brown Micarta Grey, M390 Handrubbed pocket knife with comb

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Reate JACK 2.0 Brown Micarta Grey, M390 Handrubbed pocket knife with comb

Relevant topics