Name: MKM Colvera LS02-CT Titanium, Carbon fibre pocket knife, Jesper Voxnaes design
Brand: MKM Knives
SKU: MMK-LS02-CT
Price: 299 EUR
Availability: BackOrder

Work Sharp Professional Precision Adjust WSBCHPAJ-PRO-I sharpening system

notforsale

not_replaced_in

Spyderco Bead BEAD5LY Flat Bead Pewter with lanyard

Spyderco Sharpmaker, 204MF

productlabel

KME Precision Knife Sharpening System, Diamond Stone Kit, KF-D4

Skerper paddle strop Viking, rough, stropping paddle

Skerper Paddle Strop STP001, stropping paddle

Skerper Basic sharpening set 180/600/1000/3000 with ceramic sharpening steel, SH004

Skerper Maintenance Oil Pen MA002, 10 ml

Knivesandtools 550 paracord type III, fish and fire paracord, 100 ft (30.48 m)

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

Nano-Oil 10w maintenance oil 8cc/8ml

Fallkniven Diamond Ceramic Whetstone DC4

Knivesandtools Knife Pouch Black, by Maxpedition

Knivesandtools EDC pouch

Ballistol maintenance oil, 50 ml

Knivesandtools 550 paracord type III, colour: olive drab, 100 ft (30.48 m)

Knivesandtools 550 paracord type III, colour: black, 100 ft (30.48 m)

Knivesandtools Enamel Saucepan E-SP14-01, 14 cm, enamel sauce pan

Knivesandtools Knife Patch, Padraig Croke design

Handle/blade: titanium & carbon fibre/M390
Blade length: 7.6 cm
Weight: 100 grams

The **MKM Colvera** is an impressive knife, designed by Jesper Voxnaes and made by LionSteel. You can tell that the Colvera was produced by Lionsteel when you look at the stunning finish on the titanium parts of the handle. It truly is amazing to look at. Something Lionsteel is known for. The pocket clip is also worth mentioning. It was made from piece of titanium and, just like the handle, enhanced with a diamond pattern. Looks great!



The Colvera collection is very versatile. This version is enhanced with a grey titanium scale with blue accents and a blade with a satin finish. The blade is made from M390 steel. A great type of steel that is great for daily use. M390 steel retains its sharpness well and is corrosion resistant. The flipper is another detail that emphasizes that the Colvera was produced by Lionsteel. It is namely, like with the Lionsteel TRE, attached to the blade. If you are living somewhere where one-handed opening pocket knives are forbidden you can easily remove the flipper.



## Where does MKM Knives come from?


MKM is a cooperation between Viper, LionSteel, Fox and Mercury. Four masters working in the Italian knife industry. It is no coincidence that they all come from the city: Maniago, northern Italy. The knife capital of the south of Europe. MKM stands for Maniago Knife Makers. This MKM Colvera is made by LionSteel.



MKM Colvera LS02-CT Titanium, Carbon fibre pocket knife, Jesper Voxnaes design

brand

colour

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

expectedRestockDate

legal_agecheck_key

msrp_price

when spending at least €150 on MKM knives (1 per order)

Free MKM Patch

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

bearring_type

The is the type of bearring used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearring types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearring type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

MKM Colvera LS02-CT Titanium, Carbon fibre pocket knife, Jesper Voxnaes design

Free MKM Patch

MKM Colvera LS02-CT Titanium, Carbon fibre pocket knife, Jesper Voxnaes design

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

MKM Colvera LS02-CT Titanium, Carbon fibre pocket knife, Jesper Voxnaes design

MKM Colvera LS02-CT Titanium, Carbon fibre pocket knife, Jesper Voxnaes design

Free MKM Patch

MKM Colvera LS02-CT Titanium, Carbon fibre pocket knife, Jesper Voxnaes design

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

MKM Colvera LS02-CT Titanium, Carbon fibre pocket knife, Jesper Voxnaes design

Relevant topics