Work Sharp Professional Precision Adjust WSBCHPAJ-PRO-I sharpening system

notforsale

not_replaced_in

productlabel

Knivesandtools Knife Pouch Black, by Maxpedition

Work Sharp WSKTS2 Knife & Tool Sharpener MK2

Skerper Maintenance Oil Pen MA002, 10 ml

Knivesandtools 550 paracord type III, fish and fire paracord, 100 ft (30.48 m)

Knivesandtools 550 paracord type III, colour: black, 100 ft (30.48 m)

Nano-Oil 10w maintenance oil 8cc/8ml

Knivesandtools EDC pouch

Ballistol maintenance oil, 50 ml

Knivesandtools Knife Patch, Padraig Croke design

Knivesandtools Skull Patch, Padraig Croke design

Knivesandtools #OneKnifeStand, knife stand

Handle/Blade: G10/N690Co
Blade length: 6,5 cm
Weight: 110 grams



The **Fox Derespina Karambit** is a cool karambit knife, made in Italy. Fox is renowned for its karambit's and this Derespina is another excellent example. It is stunning and amazing to use thanks to the shape of its blade. The double hollow edge truly takes hold of the material. There is no way to escape it. You can quickly cut through rope with this knife. The transition between the two cutting surfaces works a little like one large serration.



 The karambit has its origins in south east Asia. Here it evolved from being an agricultural knife to a combat knife for one on one fights. You use a karambit by putting your index finger through the ring so that the blade is located at the bottom of your fist.


You open the N690Co steel blade with the double thumb studs. A solid detent makes sure the blade stays closed at first, but will afterwards open with a solid click. When opened the linerlock keeps the blade in place. G10 scales are placed around the liners. The handle is enhanced with screw holes for all four pocket clip positions. As such you can decide for yourself how you carry the knife.




Fox Derespina Karambit FX-590 karambit knife

brand

colour

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

expectedRestockDate

legal_agecheck_key

msrp_price

orderNumber

reaction

reviewDate

valueForMoneyStars

meetsExpectationsStars

authorCity

Stevig mes. Vind het ontgrendelen om dicht te plooien langs de binnenkant gewoonweg gevaarlijk. Gaat ook enorm stroef open. Maar dit kan nog beter worden door gebruik. Kortom: je krijgt hem moeilijk open en gevaarlijk om dicht te doen. Week nadat ik hem besteld had vond ik mijn sog zakmes terug. Veel beter.

Eerste karambit in bezit. Ligt goed in de hand als je met je vingers boven de ring vasthoudt. In de traditionele houding (met de wijsvinger in de ring) ligt het ook comfortabel, maar minder praktisch qua openen. De duimsteun is hierdoor niet met 1 hand te openen.  Had eigenlijk een wave opener erbij moeten hebben. Dan was het iets veelzijdiger geweest.

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Fox Derespina Karambit FX-590 karambit knife

Fox Derespina Karambit FX-590 karambit knife

Full description

Specifications

Reviews

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Fox Derespina Karambit FX-590 karambit knife

Fox Derespina Karambit FX-590 karambit knife

Fox Derespina Karambit FX-590 karambit knife

Full description

Specifications

Reviews

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Fox Derespina Karambit FX-590 karambit knife

Relevant topics