Name: CRKT Septimo Arcane 7050 pocket knife, Jeremy Valdez design
Brand: CRKT
SKU: CK-7050
Availability: BackOrder
Rating: 9 (2 reviews)

Handle/blade: aluminium and thermoplastic/8Cr13MoV
Blade length: 9.4 cm
Weight: 130 grams

The **CRKT Septimo/Arcane** is a great pocket knife, designed by Jeremy Valdez. He originally called this knife the Arcane, but changed into Septimo which means ‘seventh’ in Spanish and refers to Valdez’ time at the 7th Special Forces.


The Septimo has a 9.4 cm blade, with a remarkable edge. Well: three-quarters is pretty standard. Only when you reach the handle you will notice the large cutting hook. That is a large Veff-serration. Cutting serrations that will enable you to effortlessly cut through rope, cardboard and other tough materials. But there is more, Valdez had chosen a tanto-tip. Optimized for its piercing powers. As a result the Septimo is incredibly versatile. Just like the special forces.


Jeremy Valdez designed the CRKT Septimo after being involved in a helicopter crash in Afghanistan. The knife he owned at the time wasn’t good enough to free his wounded comrades from the wreckage. Valdez used this experience to design the Septimo. The knife he wished he had with him at the time. Versatile, quickly deployable and light-weight.



CRKT Septimo Arcane 7050 pocket knife, Jeremy Valdez design

brand

colour

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

notforsale

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

not_replaced_in

expectedRestockDate

legal_agecheck_key

videos

orderNumber

reaction

reviewDate

valueForMoneyStars

meetsExpectationsStars

authorCity

Ik vind het een zeer mooi, soepel en praktisch mes. 

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

CRKT Septimo Arcane 7050 pocket knife, Jeremy Valdez design