Name: Case Small Stockman Smooth Natural Bone, 13057, 6333 SS pocket knife
Brand: Case Knives
SKU: CE13057
Availability: BackOrder

Handle/blade: bone/Tru-Sharp SS
Blade length: 5.0 cm 
Weight: 30 grams

The **Case Small Stockman** is a small version of a real classic in the pocket knife world. This pattern is almost as old as the entire category of Traditionals. This Case Stockman is a very pure incarnation of this classic model. It has three blades: a clippoint blade as the *main blade*, a 3.8 cm sheepfoot blade and a *pen blade*.

 When opened the three blades are kept in place by a slipjoint lock. Because Case uses two lock-springs to keep three blades in place it is inevitable that the blades are located close together and can even touch each other when closed. This is a part of the design of the blade and also gives it, its authentic charm.

 ## Case Tru-Sharp SS steel

 The blade is made from Case Tru-Sharp SS. This is a stainless type of steel that is similar to 420HC steel. A great feature of this type of steel is that it can be sharpened quickly.

 ## Natural Smooth Bone

 The handle is made from *Natural Smooth Bone*. You might know Case from the coloured bone handles. This version, however, was left blank. It is cow bone that is still enhanced with some texture. This is a truly classic type of handle material which radiates class and elegance. Perfectly matching the Case knives.

 ## Case Knives: traditional pocket knives

 Ever since 1889 Case has been producing pocket knives. Each pocket knife is assembled and finished by hand, relatively unique for an American brand. As a result each Case knife is unique. Case knives are incredibly collectible and a great addition to your standard EDC pocket knife. Great as a gift, both for yourself or someone else.

 In the specifications for this product, we have based the blade on the large blade.



Case Small Stockman Smooth Natural Bone, 13057, 6333 SS pocket knife

brand

colour

zm_series

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

traditionalmodel

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

notforsale

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

not_replaced_in

expectedRestockDate

legal_agecheck_key

videos

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Case Small Stockman Smooth Natural Bone, 13057, 6333 SS pocket knife