Name: Buck Momentum Tungsten 294GYS2 pocket knife
Brand: Buck
SKU: BUCK294GYS2
Availability: BackOrder

Buck CSAR-T 095 Buck/TOPS 0095BKSTP-B pocket knife

notforsale

not_replaced_in

legal_agecheck_key

msrp_price

Stanley The AeroLight Transit Mug 350 ml, Rose Quartz Metallic, thermos

strike_price

Böker Magnum CSB Latin Machete 02RY691

Smith & Wesson Extreme Ops SWFR2S black, rescue knife

Eden Elements 2001-318 santoku, 19 cm

Mora Bushcraft Black

Smith & Wesson M&P Special Ops Ultimate Survival Knife 7” 122584 survival knife

Agawa Canyon Boreal21 all-purpose foldable saw, green

HORL 2 knife sharpener oak wood, HO2E-SET

productlabel

Marttiini Lumberjack 127015 Dark Birch Stainless, outdoor knife

Petromax Dutch Oven FT9 flat base, FT9-T

Agawa Boreal24 all-purpose foldable saw, green

Agawa Canyon Boreal15 all-purpose foldable saw, green

Cold Steel SRK Compact 49LCKD survival knife

Condor Blue River Knife 2825-4.3HC outdoor knife 62729

de Buyer Acier Carbone Steel frying pan, 28cm 5110.28

Kindling Cracker wood splitter

Nitecore NB10000 Power bank, 10.000 mAh

Silky Bigboy 2000 Outback Edition, 360-6.5

Ballistol maintenance oil, 50 ml

Knivesandtools #EveryDayCloth, micro-fibre cloth

Skerper Pocket Strop STP002, stropping paddle

Knivesandtools #OneKnifeStand, knife stand

Skerper Maintenance Oil Pen MA002, 10 ml

Fallkniven Diamond Ceramic Whetstone DC4

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

Skerper Pocket Stone diamond/ceramic sharpening stone, SO003

Schmuckatelli Buck Knives Anvil Bead Pewter

Buck Deuce 0375BRS pocket knife

Buck Waffle Knit Beanie 89170 Blaze Orange, beanie

Skerper Basic sharpening set 180/600/1000/3000 with ceramic sharpening steel, SH004

Work Sharp Angle Set knife sharpener, WSBCHAGS

Knivesandtools 550 paracord type III, colour: black, 100 ft (30.48 m)

Buck Logo Leather Patch Cap 89159, Blue/Black

Handle/blade: aluminium/CPM S30V
Blade length: 8.2 cm
Weight: 115 grams

The **Buck Momentum 294** is a pocket knife that is made in the United States and enhanced with an assisted opening. This means that the blade is helped by a spring when you push open the flipper or thumb hole. To prevent the knife from opening when you don't want it to the spine of the handle has been enhanced with an additional lock. Before you open the knife you need to unlock it.

 The blade is made from CPM 30CV-steel. A premium type of steel that, because of the Paul Bos heat treatment, functions well. The handle is made from anodized aluminium and enhanced with subtle grip grooves. The deep-carry pocket clip (can be removed) enables you to discretely carry the knife with you.



Buck Momentum Tungsten 294GYS2 pocket knife

brand

colour

zm_series

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

expectedRestockDate

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

bearring_type

The is the type of bearring used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearring types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearring type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Buck Momentum Tungsten 294GYS2 pocket knife

Buck Momentum Tungsten 294GYS2 pocket knife

Full description

Specifications

Also popular

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Buck Momentum Tungsten 294GYS2 pocket knife

Buck Momentum Tungsten 294GYS2 pocket knife

Buck Momentum Tungsten 294GYS2 pocket knife

Full description

Specifications

Also popular

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Buck Momentum Tungsten 294GYS2 pocket knife

Relevant topics