Name: Benchmade Infidel Fixed 133 dagger, satin
Brand: Benchmade
SKU: BE133
Availability: BackOrder

Benchmade SOCP Desert Tan 185BK-1 CPM 3V fixed knife, Greg Thompson design

legal_agecheck_key

notforsale

not_replaced_in

msrp_price

Schrade Decimate Brush Sword 1182525 black, machete

The James Brand The Randolph, titanium

Smith & Wesson Extreme Ops SWFR2S black, rescue knife

Cold Steel Leatherneck SF D2, 39LSFC

productlabel

strike_price

Opinel set pocket knives 10-piece, stainless steel

Victorinox Huntsman 1.3713 Red, Swiss Army Knife

Eden Elements 2001-318 santoku, 19 cm

Smith & Wesson M&P Special Ops Ultimate Survival Knife 7” 122584 survival knife

Fenix HP35R Search & Rescue, rechargeable head torch, 4000 lumens

Hultafors Ryoba Japanese pull saw 240 mm

Opinel No. 08 pocket knife, carbon steel, blade length 8,5 cm

SOG PowerPint PP1001 multi-tool

Victorinox Signature Lite, Swiss pocket knife, transparant silver

Victorinox SwissClassic vegetable knife set, set of 3 6.7116.32

Eden Sugoi Olive 2090-020 chef's knife 20 cm

Felco Special Pack, pruning shears #2 with hat

Fenix HT18R rechargeable hunting torch, 2800 lumens

Fox Vulpis FX-VP108OD, N690Co, Aluminium OD Green, pocket knife

Handle/blade: aluminium/D2
Blade length: 11.5 cm
Weight: 145 grams


The **Benchmade Infidel Fixed** is a fixed dagger, based on the famous Benchmade Infidel pocket knife. The result is a fearsome looking knife. It will be perfectly at ease in the gear of any professional soldier, but also in the collection of a tactical knife enthusiast.



The blade of the Infidel is sharp and pointy. It is enhanced with two cutting edges and is made from D2 steel. A type of tool steel that is very tough and will retain its sharpness well. The handle is made from milled aviation-grade aluminium. The black anodized finish on the scales makes it look really cool.



You carry the Infidel in the included Kydex sheath. You can wear it in many different ways.




Benchmade Infidel Fixed 133 dagger, satin

brand

colour

zm_series

blade_finish

handle_material

knife_edge_type

material_sheath

sharpening_type

knife_bladeshape

sharpening_angle

pocketknife_steel

knife_sheath

value_length

value_weight

value_blade_height

value_blade_length

value_blade_thickness

expectedRestockDate

videos

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_handle_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

fixed_blade_type

knife_best_use

We like to highlight what use the manufacturer had in mind, or what we believe the knife is suited for

Best use

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Benchmade Infidel Fixed 133 dagger, satin

Benchmade Infidel Fixed 133 dagger, satin

Full description

Specifications

Also popular

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Benchmade Infidel Fixed 133 dagger, satin

Benchmade Infidel Fixed 133 dagger, satin

Benchmade Infidel Fixed 133 dagger, satin

Full description

Specifications

Also popular

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Benchmade Infidel Fixed 133 dagger, satin

Relevant topics