Name: Benchmade 818GY-1901 MINI LOCO, Limited Edition
Brand: Benchmade
SKU: BE818GY-1901
Price: 334.9 EUR
Availability: BackOrder

Work Sharp Professional Precision Adjust WSBCHPAJ-PRO-I sharpening system

notforsale

not_replaced_in

Benchmade Redoubt 430SBK Serrated pocket knife

legal_agecheck_key

productlabel

KME Precision Knife Sharpening System, Diamond Stone Kit, KF-D4

Spyderco Sharpmaker, 204MF

Skerper paddle strop Viking, rough, stropping paddle

Skerper Paddle Strop STP001, stropping paddle

Benchmade Knife Roll 50019 knife bag

Skerper Basic sharpening set 180/600/1000/3000 with ceramic sharpening steel, SH004

Benchmade Knifesmith 50141 Multi-Bit Driver, screwdriver

Benchmade bottle opener 1000000

Benchmade Worksharp BE50082 Guided Hone Tool, 14 degrees

Benchmade Blue Box Torx Tool Kit 981084

Skerper Maintenance Oil Pen MA002, 10 ml

Knivesandtools 550 Paracord Type III Military Spec RG1168H, coyote, 100 ft (30.48 m)

Knivesandtools 550 Paracord Type III Military Spec RG1167H, foliage, 100 ft (30.48 m)

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

Knivesandtools Knife Pouch Black, by Maxpedition

Knivesandtools EDC pouch

Ballistol maintenance oil, 50 ml

Handle/blade: micarta/CPM 20CV
Blade length: 8.4 cm
Weight: 120 grams

The **Benchmade Mini Loco 818GY-1901 Limited Edition** is a cool pocket knife for EDC use. The blade has a *reverse tanto* shape. It looks like the famous Benchmade 940, but with more blade height. You open the Benchmade Mini Loco with the oval thumb hole. It gives you plenty of traction to open it quickly and smoothly. You can even 'flick' it. 

 This is a special Limited Edition of which only 500 were made. Available while stocks last.

 The blade is made from CPM 20CV-steel. An extremely wear and tear and corrosion resistant type of steel. The handle is made from python micarta. The stunning contours are complemented by the fine finish of the material. In terms of ergonomics the Mini Loco is simply very impressive. Because of the curve it fits perfectly in your hand.

 Benchmade slightly adjusted the famous Axis lock for this pocket knife. The button you use it with namely has the same style as the pivot. This custom hardware makes the knife look very luxurious. More impressive than the price might suggest.



Benchmade 818GY-1901 MINI LOCO, Limited Edition

brand

colour

zm_series

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

expectedRestockDate

msrp_price

when spending at least €175 on Benchmade knives (1 per order)

Free Knivesandtools #OneKnifeStand

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

bearring_type

The is the type of bearring used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearring types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearring type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Benchmade 818GY-1901 MINI LOCO, Limited Edition

Free Knivesandtools #OneKnifeStand

Benchmade 818GY-1901 MINI LOCO, Limited Edition

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Benchmade 818GY-1901 MINI LOCO, Limited Edition

Benchmade 818GY-1901 MINI LOCO, Limited Edition

Free Knivesandtools #OneKnifeStand

Benchmade 818GY-1901 MINI LOCO, Limited Edition

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Benchmade 818GY-1901 MINI LOCO, Limited Edition

Relevant topics