Handle/blade: micarta/CPM 3V
Blade length: 22.6 cm
Weight: 575 grams



The **Bark River Jx5 Vengeful** is a solid machete. Truly a knife that will bring a smile to your face when you hold it. With a blade thickness of no less than 4.8 mm you know that this knife was made to be used.



The blade is made from CPM 3CV-steel. A tool steel that is known for its exceptional strength. As such it won't break and will retain its sharpness well. You do, however, need to be careful with moisture and acids: CPM 3V is not completely stainless. So clean it after use and occasionally add a drop of oil to keep this knife in great shape. The edge has been enhanced with a convex grind which you can maintain by [stropping it](/en/ct/stropping.htm).



The handle is made from canvas micarta. A strong and light-weight material, made from linen and synthetic resin. Feels comfortable in hand, even in wet or cold circumstances.



The Bark River JX5 Vengeful comes with a leather belt sheath (max. belt width 5.9 cm). This sheath is suited for left and right-handed use.



Bark River makes all of its knives almost completely by hand. As such each knife is unique. Especially when working with natural materials a knife can differ from the photographs. The knife you receive can therefore be subtly different from the product photos. The model and type of material, however, will always be the same. Because each Bark River knife is produced by hand in select production runs the delivery times can vary greatly. Sometimes it can take months or even more than a year before a product is back in stock. Is a product listed as in stock on our website? If so we can immediately ship it!




Bark River JX5 Vengeful 1 CPM 3V Black Canvas Micarta machete

brand

colour

blade_finish

handle_material

knife_edge_type

material_sheath

sharpening_type

knife_bladeshape

pocketknife_steel

legal_agecheck_key

notforsale

knife_sheath

value_length

value_weight

value_blade_height

value_blade_length

value_blade_thickness

not_replaced_in

expectedRestockDate

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_handle_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

fixed_blade_type

knife_best_use

We like to highlight what use the manufacturer had in mind, or what we believe the knife is suited for

Best use

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Bark River JX5 Vengeful 1 CPM 3V Black Canvas Micarta machete