Name: Benchmade 765 Mini Ti Monolock
Brand: Benchmade
SKU: BE765
Price: 443.9 EUR
Availability: BackOrder
Rating: 2 (1 reviews)

Work Sharp Professional Precision Adjust WSBCHPAJ-PRO-I sharpening system

notforsale

not_replaced_in

Benchmade Weekender 317-1 Green Canvas Micarta, Slipjoint pocket knife

legal_agecheck_key

productlabel

KME Precision Knife Sharpening System, Diamond Stone Kit, KF-D4

Spyderco Sharpmaker, 204MF

Skerper paddle strop Viking, rough, stropping paddle

Skerper Paddle Strop STP001, stropping paddle

Benchmade Knife Roll 50019 knife bag

Skerper Basic sharpening set 180/600/1000/3000 with ceramic sharpening steel, SH004

Benchmade Knifesmith 50141 Multi-Bit Driver, screwdriver

Benchmade bottle opener 1000000

Benchmade Worksharp BE50080 Guided Hone Tool, 20 degrees

Benchmade Blue Box Torx Tool Kit 981084

Skerper Maintenance Oil Pen MA002, 10 ml

Knivesandtools 550 Paracord Type III Military Spec RG1167H, foliage, 100 ft (30.48 m)

Knivesandtools 550 paracord type III, colour: charcoal grey, 100 ft (30.48 m)

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

Knivesandtools Knife Pouch Black, by Maxpedition

Knivesandtools EDC pouch

Ballistol maintenance oil, 50 ml

Handle/blade: titanium/M390
Blade length: 8,2 cm
Weight: 92 gram

The **Benchmade 765 Mini Ti Monolock** is an amazing pocket knife for daily use. It is a modern gentleman's carry thanks to its tasteful titanium scales.


The blade is made from M390 steel. This hard, tough type of steel retains its sharpness well. The blade is also very thin and the pocket knife is enhanced with a nice droppoint shape. A real slicer! You open the knife with the help of the thumb stud. The titanium framelock locks the blade when opened.


The Benchmade 765 is a smaller, newer version of the [Benchmade 761 Ti Monolock](/en/pt/-benchmade-761-ti-monolock.htm).



Benchmade 765 Mini Ti Monolock

brand

colour

zm_series

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

expectedRestockDate

videos

msrp_price

when spending at least €175 on Benchmade knives (1 per order)

Free Knivesandtools #OneKnifeStand

orderNumber

reaction

reviewDate

valueForMoneyStars

meetsExpectationsStars

authorCity

Voor de prijs verwacht je wat. Mijn exemplaar was echt slecht afgewerkt en niet met één hand te openen. Ik was erg teleurgesteld omdat ik het model erg mooi vind en doorgaans zeer goede ervaringen heb met Benchmade. Paar tientjes bijgelegd  en omgeruild voor een Chris Reeve Inkosi. Prima opgelost door K&T

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Benchmade 765 Mini Ti Monolock

Free Knivesandtools #OneKnifeStand

Benchmade 765 Mini Ti Monolock

Full description

Specifications

Reviews

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Benchmade 765 Mini Ti Monolock

Benchmade 765 Mini Ti Monolock

Free Knivesandtools #OneKnifeStand

Benchmade 765 Mini Ti Monolock

Full description

Specifications

Reviews

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Benchmade 765 Mini Ti Monolock

Relevant topics